Install “Raspbian” on your Raspberry Pi and print to the screen/terminal “Hello Robot” once every second.
https://github.com/jallendc/ece590_homework/blob/master/hw1_4_helloRobot.py
Assignment 1.4
Leave a reply
Category Archives: ECE 590 Homework1
Assignment 1.3.2
Using the OpenCM micro-controller to make one xl-320 servo move from 45 deg to 90 deg with a period of 2 seconds and a second move from 0 to 180 with a period of 1 second.
https://github.com/jallendc/ece590_homework/blob/master/hw1_3_helloTurn2.ino
Assignment 1.3
Using the OpenCM micro-controller to make an XL-320 servo move from 45 deg to 90 deg with a period of 2 seconds.
https://github.com/jallendc/ece590_homework/blob/master/hw1_3_helloTurn.ino
Assignment 1.2
Using an OpenCM micro-controller to make the Green onboard LED blink at 0.5 hz.
https://github.com/jallendc/ece590_homework/blob/master/hw1_2_helloBlink.ino